Gruber offers three types of Vibrators for use with Vibe Tables, Casting Carts, etc - anywhere you want to apply vibration during a casting process:

• Pneumatic Ball Type - two types
  • Table Vibrators
  • Replacement Filler Metering Hopper Ball Vibrators for select Gruber Automation Equipment products.
    
• Pneumatic Turbine
• Electric
  

Pneumatic Ball Type Table Vibrators

Gruber Pneumatic Ball Type Vibrators (sometimes referred to as Rotary Vibrators) are used in vibrate excess air out of marble matrix after pouring. These vibrators provide high-frequency vibration at an economical price. The only moving part is a high-grade chrome steel ball. Lubrication, while not required, extends the life of the units. Other uses these vibrators are for small hoppers, parts feeders, chutes and match plates. Air consumption for these units is moderate. If the application requires more than three hours per day of operation or requires lubrication-free operation, the Turbine Vibrators may be a better choice.

Vibrolator™ CV Series Ball Type Vibrators - These ball type vibrators are extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs.
	Model CV-25 - extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs. Order Number 02012
	Model CV-35 - same as the CV-25, but produces up to 675 lbs force at 10,000 VPM. Order Number 02013
DV-41 and DV-51 - These vibrators produce all directional vibration required for big jobs. Meets rugged requirements on extra large bins and hoppers.Both feature migratory, replaceable races.
	#41 - For very rigid hoppers or chutes, the #41 vibrator is without equal. Ideal for larger weigh batchers in ready-mix plants. .
	#51 - This vibrator delivers more vibratory force at lower frequency. An effective unit for use on material that responds best to higher amplitudes and lower frequencies.

Pneumatic Ball Type Vibrators - for use with Gruber Filler Metering Hoppers on Gruber Automated Equipment products

The following Pneumatic Ball Type Vibrators are specifically for use with these Gruber products:

• Autocaster™ continuous casting systems
• Batchmaster™ automated metering systems
• Groundhopper™ metering and dispensing systems

	Replacement Air Operated Ball Vibrators Replacement vibrator for use with all Gruber Filler Metering Hoppers used on Gruber Autocaster™ continuous casting systems and Batchmaster™ automated metering systems. Includes Muffler (foreground) Air Operated Ball Vibrator (ABF-10) - #0832116
	Replacement Air Operated Ball Vibrators Replacement vibrator for use with all Gruber Filler Metering Hoppers used on Gruber Groundhopper™ metering and dispensing systems. Includes Muffler (foreground) Air Operated Ball Vibrator (ABF-13) - #0831323
	Replacement Air Operated Ball Vibrators   Includes Muffler (foreground) Air Operated Ball Vibrator (ABF-19) - #0832119

Vibco VS Series Turbine Vibrators

Turbine Vibrators Outperform Piston and Ball Vibrators

VIBCO is the originator of Silent Turbine Vibrator technology and manufactures a complete line of turbine vibrators for industrial and construction use. VIBCO's Silent Turbine Vibrators are an ideal solution. They save air, are more efficient, don't require lubrication, and have virtually silent operation. A turbine vibrator will typically outlast a ball vibrator 3 to 1.

With foolproof operation and low noise, Silent Turbine Vibrators have quickly become the specified and standard units for many industries. Some typical applications include parts feeding, batchers, hoppers, chutes, packaging, foundry match-plates, shake-outs and sand hoppers, screens, and wherever parts or material hangs.

Vibco Model VS-380 Pneumatic Turbine Vibrator

Vibco Model VS-320 Pneumatic Turbine Vibrator

Click here for specs and complete information on Vibco VS-380 and VS-320 Pneumatic Turbine Vibrators

Electric Vibrators

Replacement Vibrator Bushings

These and other Vibe Table Bushings and Table Vibrator spare parts are available.

• Bushing for new style Pneumatic Vibe Table (with tube frames).
• Black Vibe Bushings Electric
• Kit Stepped Vibe Bushing